Installing A Replacement Foot Pad For Lippert Hydraulic Ground Control Level System  

Josh, the bolt for the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 is 7/16" x 1/2" and needs to be torqued to 132 ft.-lbs.

You'll have to hold the leg of your jack still so that you can unscrew the bottom of the foot pad to replace it. If you have a large set of channel locks you could do this pretty easily with them. The trick will be hold it tight enough to keep it…

The exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use #LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will…

Yes, you'd need to hold the inner jack leg while you remove the bolt from the bottom when replacing the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System part #LC324269. In order to hold the inner jack leg, I recommend…

I suggest using a strap wrench to hold the cylinder side while tightening the installation hardware on the Replacement Foot Pad, #LC324269.

Thanks for the picture! I took a look at what we got for your 2018 Thor Palazzo Motorhome, and it appears you need the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269. This replacement will replace the foot pad for…

For your bike rack, I recommend the Lets Go Aero LED Light Kit for GearCage4 and BigBoss Railed Cargo Carriers #H01540. This will easily work with your factory trailer connector. If you don't have the separate 4 way connection, then you can use…

Lippert does not recommend the use of any hydraulic oil additives with their hydraulic leveling systems. They recommend using automatic transmission fluid Dexron III or Mercon 5 fluid.

If the touch pad is showing "Retract Time out Return Levelers for service" all you need to do is hit, enter and retract at the same time. That will clear that code. I confirmed this with our contacts at Lippert.

The Lippert Components six-point hydraulic Level Up trailer leveling system you have in your 2017 Grand Design Solitude 300GK 5th wheel trailer can be operated only through use of the touch pad control panel on the RV. This particular system cannot…

The Replacement Foot Pad #LC324269 that you referenced uses (and includes) a threaded 7/16" bolt for mounting. The mounting hole itself is just about 1/2" in diameter.

If your 2021 Jayco Greyhawk Prestige has hydraulic Lippert Ground Control leveling system then yes the replacement feet part #LC324269 would be correct. I attached a picture of what the jack leg should look like.