Will A Replacement Solera Support Arm Work With A Dometic RV Awning  

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

I checked with Lippert and asked if we could get just the part number you mentioned and they told me it's not available by itself. You'd need the entire assembly part #LC281154.

We have replacement pitch arms for the Solera 69 inch awning setups like what you have with the part #LC375994 which would be all that you'd need.

Since you have a 63 inch long Solera awning arm assembly in black the correct replacement is the part #LC404523.

Per Lippert, the inner arm 383152 is not available on its own, you must purchase the entire pitch arm which is the Solera 69" Standard Flat Awning Support Arm part #LC281154.

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

The awning does act as the roof for the Solera Family Room #LC362235. If you plan on repairing your fabric please use the Repair Tape #CAM42623 rather than duct tape. This tape is specifically designed for use on the awning material and will not dry…