Customers compare 166081 to these similar products
Products Featured in this Video
Today we're going to take a look at the 3-inch-long shackle bolt with the lock nut for double-eyed springs. This bolt will secure leaf springs to your front or rear hangar of your trailer's suspension system. Does include this lock nut to secure the bolt into place. Now the bolt itself is a grade-5 bolt. The overall length on this bolt if we measure it from the bottom of the head to the very end… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5…
view full answer...The bushings for the slipper springs in your Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 would not need grease so you can definitely swap out the wet bolts with some standard bolts…
view full answer...The 3 inch shackle bolt part #166081 would be a great option to use with the CE Smith suspension hanger part #CE14016G. This would be a better fitting size than going with the longer 3.5 inch bolt you mentioned.
view full answer...The orientation of the 26" 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles #e22YR you have installed on your trailer looks just fine to me! You're correct that you want some angle for the shackles to help account for some flex in the…
view full answer...There actually is not a specific torque rating for shackle bolts like the Redline #166081 that you referenced. You just want to make sure that the bolt is long enough so that when installed you have at least 2 threads protruding from the nut. This…
view full answer...The two options you're referring to, the Dexter Trailer Axle w/ Electric Brakes #7685269-EB and Trailer Axle w/ Electric Brakes #e52SR are essentially the same when it comes to their specs. The only difference is the manufacturer with one being…
view full answer...The LCI 795795 cross-references a Lippert 1621 Pin Box so I recommend the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP85FR as this is the only gooseneck pin box adapter which won't void the frame warranty.
view full answer...If the shackles aren't angled slightly you run the risk of the equalizers angling and having the shackles on the wrong side of the springs. 28 inch leaf springs are hard to come by so your best solution will be to either go with replacement…
view full answer...You want leaf spring shackles to be at a slight angle as that prevents the springs from flipping around to the other side of the equalizer over uneven terrain. I attached a picture that shows what the angle is typically like.
view full answer...There is not a specific torque requirement for bolts like the Shackle Bolt #166081. You'll want to make sure that you're using a lock nut and ensure that the bolts you use are long enough so that when installed you will have at least 2…
view full answer...According to Redline, the #166081 bolts are 3.1 inches long.
view full answer...Yes, the Grease Seals 10-36 part #RG06-070 are a direct replacement for the Dexter 010-036-00.
view full answer...