Trailer and Electric Winches
Winches
Videos
for Winches
Help Articles
for Winches
Expert Answers
for Winches
For your 2021 Chevrolet Blazer you're going to need to start with a base plate kit. Since there aren't any Blue Ox base plates I'd recommend going with the Roadmaster Direct-Connect Base Plate Kit #RM-523204-5. These are just…
view full answer...To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Yes, the Buyers Products Over-The-Cab Truck Bed Ladder Rack #3371501150 will fit great with the 6-1/2' bed on your 2019 Ford F-150. Attached is an installation video as well as a photo of this installed on a 2016 F-150 so you can get an idea…
view full answer...The Durabilt Ratchet Chain Binder #DU32MR will close up 8" from 28-1/2" overall length to 20-1/2" overall length. It is designed to fit chains with 5/16" to 3/8" thick links.
view full answer...The 2x2 inch square axle is likely 3,500 lbs or less capacity. I would need more spindle dimensions or bearing numbers to assist. If you pull a hub and measure at the spindle where the bearings and seal ride using the digital caliper like #PTW80157…
view full answer...The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 will fit with your lifted 2018 GMC Sierra 1500 but you might need to add a spacer kit if you had to lift the back of your truck. Since you didn't…
view full answer...Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard…
view full answer...The Superwinch S7500 Trailer Winch #SW1475201 is designed to have more of a "universal" style for mounting and may require some adaption for installation because it does not have a typical mounting pattern. The Superwinch S7500…
view full answer...The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…
view full answer...The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…
view full answer...The hub bore diameter close to the base of the Dexter Trailer Idler Hub Assembly for 6,000-lb Axles #42655UC1 is just over 3-1/2". Please note that the hub you're asking about is a lug-centric hub which means it has the studs in place and…
view full answer...